Roofing Labor Cost per Square Calculator (2026)
Last updated · Prices reviewed
Roofing labor cost per square is about $240–$480 for asphalt shingles. Labor plus one layer of tear-off on a 1,000–3,000 sq ft home comes to about $3,600–$28,800.
Estimate your roofing labor
Free · no sign-up · results update as you type
26.6° slope
Medium
The sloped roof surface, from a quote, plans or the roofing calculator. Pitch then sets only the steep-roof labor factor.
Typical $10,600, range $6,400–$17,200. National estimate
Labor + tear-off · asphalt shingles
$10,600typical
Range $6,400–$17,200
- Installation labor (approx.)
- $7,300
- Old roof removal 1 layer
- $3,300
Total (typical) $10,600
National estimate
Limited evidence Weakest figure used: the labor share (limited).
Prices checked November 2026
- Roof area
- 2,200 sq ft
- Squares (no waste)
- 22.0
- Pitch angle
- 26.6°
- Labor per square · asphalt shingles, estimated from the labor share
- $240–$480 typical $330
- Every price comes from a named source, with the date we checked it.
- No contact details asked
- An estimate, not a quote
Roofing labor for asphalt shingles costs about $240–$480 per square, before materials, our estimate from the labor share of the installed price. Labor plus tearing off one old layer on a 1,000–3,000 sq ft home comes to about $3,600–$28,800. Roof size, pitch, stories and the number of old layers decide where yours lands. Enter your roof above, then compare written quotes.
Roofing labor cost by home size
Labor for an asphalt shingle roof on homes from 1,000–3,000 sq ft, with one old layer torn off. Roof area assumes one story, a 6/12 pitch and 10% for overhangs. Materials are not included.
| Home size | Squares | Labor | Tear-off, 1 layer | Labor + tear-off |
|---|---|---|---|---|
| 1,000 sq ft | 12.3 | $3,000–$5,900 | $600–$3,700 | $3,600–$9,600 |
| 1,500 sq ft | 18.4 | $4,400–$8,900 | $900–$5,500 | $5,300–$14,400 |
| 2,000 sq ft | 24.6 | $5,900–$11,800 | $1,200–$7,400 | $7,100–$19,200 |
| 2,500 sq ft | 30.7 | $7,400–$14,800 | $1,500–$9,200 | $8,900–$24,000 |
| 3,000 sq ft | 36.9 | $8,900–$17,700 | $1,800–$11,100 | $10,700–$28,800 |
Sources: HomeGuide – Asphalt shingle roof cost; HomeGuide – Roofing shingles cost; This Old House – New roof cost; Fixr – Asphalt shingles cost (3-tab, architectural, luxury); RoofingCalculator.com – roof cost; Houzz – Cost to replace a roof; Fixr – Roof replacement cost; This Old House – Roof replacement cost calculator. How we estimate
Roofing labor cost per square, explained
A square is 100 sq ft of roof surface, the unit roofers measure, order and price by. A roof with 2,000 sq ft of surface is 20 squares. The shingle calculator turns a roof area into squares and bundles.
Labor per square is what a crew charges to install one square of new roofing. Multiply it by your roof’s squares for the labor on the whole roof: at $240–$480 per square, a 20-square roof comes to 20 times that. Materials, tear-off and extras such as decking repairs are priced separately.
Labor per square here is our estimate, not a quoted rate: the installed price per square for each material times its labor share, the part of the installed price that published cost guides put down to labor. It is a national figure for a low or medium pitch.
| Material | Labor share | Typical | Range |
|---|---|---|---|
| Asphalt shingle | 60% | $330 | $240–$480 |
| Metal | 60% | $660 | $330–$1,200 |
| Tile | 65% | $910 | $520–$1,625 |
| Slate | 65% | $1,430 | $975–$2,275 |
| Flat (EPDM / TPO) | 60% | $450 | $240–$780 |
Sources: HomeGuide – Asphalt shingle roof cost; This Old House – New roof cost; HomeGuide – Metal roof cost; This Old House – Tile roof cost; Roofing Observations – Tile roof cost guide; This Old House – Slate roof cost; Fixr – Slate roof cost; Roofing Observations – Slate roof cost guide; Fixr – Flat roof replacement cost; Angi – Flat roofing materials; HomeAdvisor – Roof inspection cost; Fixr – Asphalt shingles cost (3-tab, architectural, luxury); Fixr – Clay tile roof cost; RoofingCalculator.com – roof cost; Houzz – Cost to replace a roof; Fixr – Roof replacement cost; This Old House – Roof replacement cost calculator. How we estimate
What makes roofing labor cost more
The same roof area can take a crew very different amounts of time. These are the reasons.
Pitch
A steeper roof has more surface and is slower to work on. We group pitches into bands: Low up to 3/12; Medium 4/12 to 7/12; Steep 8/12 to 9/12; Very steep 10/12 and steeper. Our estimate adds 33% more from 8/12 to 9/12 and 50% more from 10/12 and steeper to labor and tear-off. Ask your roofer how they price steep roofs.
Stories
On a taller house, every bundle goes up further and every load of old roofing comes down further, which adds time to each part of the job.
Old layers
Each layer that has to come off before the new roof goes on is extra work and extra disposal. That is the tear-off line, priced per layer.
Access
Tight lots, steep driveways, plantings against the walls and nowhere to park a dumpster all slow the work of getting materials in and debris out.
Region
Labor rates differ from one area to another. Our figures are a US national average, so local quotes can land above or below them.
Roof tear-off cost, explained
Tear-off is removing the old roofing down to the decking, the board layer underneath, before the new roof goes on. It covers the labor to strip each layer and the cost of hauling it away.
It is priced per square foot of roof for each layer: about $0.50–$3.00 per sq ft, or $50–$300 per square. Because it is priced per layer, our estimate for two old layers is twice that for one. Your roofer can tell you how many layers are there.
Once the old roof is off, the decking can be checked. Damaged sheets are usually replaced at a price per sheet, which is not part of tear-off.
How labor shows up on a roofing quote
Quotes show labor in one of two ways, and it helps to know which you are looking at.
- One installed price: materials and labor together, per square or as a total. Labor is inside it, not listed.
- Labor as its own line: a price per square for installation, with materials listed separately. Divide by the squares on the quote to compare with the range above.
- Tear-off and disposal: often a separate line, sometimes per layer. Check how many layers it assumes.
- Extras: decking per sheet, flashing work, permits and clean-up may each have their own line.
Get written quotes from more than one licensed, insured roofer and ask what each labor line includes. These figures are estimates; the written quote is what you agree to.
Roofing labor questions
What is the roofing labor cost per square?
For an asphalt shingle roof, labor runs about $240–$480 per square, with a typical figure of $330. This is our estimate of the labor part of the installed price, using a labor share of 60% from published cost guides. A square is 100 sq ft of roof; materials and tear-off are extra. Multiply by your roof’s squares, or use the calculator above.
How much does a roof tear-off cost?
Tear-off runs about $0.50–$3.00 per sq ft of roof for each old layer, or $50–$300 per square. It is priced per layer, so two layers come to twice the figure for one. Pick the number of layers in the calculator to add it.
Is tear-off included in the labor price?
Not in our figures: the labor price per square covers installing the new roof, and tear-off is added per layer. Roofers’ quotes differ, so ask whether removal and disposal are in the labor line or listed on their own.
Why does a steeper roof cost more in labor?
A steeper roof has more surface over the same house, so there are more squares to cover. It is also slower to work on and needs more setup, so our estimate adds 33% more from 8/12 to 9/12 and 50% more from 10/12 and steeper to labor and tear-off. The calculator counts both; ask your roofer how they price steep roofs.
How is labor different from the installed price?
The installed price per square foot on our roof replacement cost calculator includes materials and labor. This page shows the labor part on its own, plus tear-off, so you can check the labor line on a quote.
How we estimate
- Prices: installed cost per square foot of roof area (US national average), built from named sources, each with the date we checked it, listed on our methodology page.
- Roof area: the roof area you enter, or living area ÷ stories × 1.10 for overhangs × pitch multiplier.
- Labor per square: installed price per sq ft × 100 × the labor share for the material (asphalt shingles on this page).
- Labor: roof area × installed price per sq ft × labor share × the steep-roof factor (none on low and medium pitches).
- Tear-off: roof area × tear-off price per sq ft × old layers × the steep-roof factor; low, typical and high tear-off prices.
- Rounding: totals to the nearest $100; prices per square to the nearest $5. Materials are not included.
An estimate, not a quote. Get written quotes from licensed, insured roofers.