Flat Roof Replacement Cost Calculator (2026)

Last updated · Prices reviewed

A flat roof costs about $5,000–$52,800 on a 1,000–3,000 sq ft home, national estimate. Enter your home for your own range.

Estimate your flat roof

Free · no sign-up · results update as you type

0/12 pitch
0.0° slope
Low
sq ft
Stories
Roof pitch Not sure?
/12

Typical $17,800, range $8,900–$31,700. National estimate — no regional data for this material.

Estimated flat roof cost · Flat (EPDM / TPO)

$17,800typical

Range $8,900–$31,700

Materials (approx.)
$5,900
Installation labor (approx.)
$8,900
Old roof removal 1 layer
$3,000

Total (typical) $17,800

National estimate — no regional data for this material.

Medium evidence Weakest figure used: the tear-off price (medium).

Prices checked November 2026

Roof area
1,980 sq ft
Squares (no waste)
19.8
Pitch angle
0.0°
Per square installed, before tear-off
$750
Full breakdown

  • Every price comes from a named source, with the date we checked it.
  • No contact details asked
  • An estimate, not a quote

Flat roof replacement costs about $5,000–$52,800 on a 1,000–3,000 sq ft home with no pitch, or $4.00–$13.00 per square foot of roof installed, with one old layer removed. It is a national estimate for EPDM and TPO membranes. The size of your roof and the number of old layers decide where yours lands. Enter your home above.

Flat (EPDM / TPO) roof cost by home size

Installed cost for homes from 1,000–3,000 sq ft: one story and no pitch (a flat roof), 10% added for overhangs and one old layer removed. A national estimate: there is no regional data for this material.

Flat (EPDM / TPO) roof cost by home size
Home sizeRoof areaSquaresInstalled cost
1,000 sq ft1,100 sq ft11.0$5,000–$17,600
1,500 sq ft1,650 sq ft16.5$7,400–$26,400
2,000 sq ft2,200 sq ft22.0$9,900–$35,200
2,500 sq ft2,750 sq ft27.5$12,400–$44,000
3,000 sq ft3,300 sq ft33.0$14,900–$52,800

Sources: Fixr – Flat roof replacement cost; Angi – Flat roofing materials; HomeAdvisor – Roof inspection cost. How we estimate

Flat (EPDM / TPO) roof price per square foot and per square

Our flat roof figures cover EPDM and TPO membranes for low-slope roofs as one range. Installed price for the new roof, materials and labor, before removing the old one. Evidence for this price: Strong evidence.

Flat (EPDM / TPO) roof price per square foot and per square
PricePer sq ftPer square (100 sq ft)
Low$4.00$400
Typical$7.50$750
High$13.00$1,300

Compared with shingles and metal

Flat (EPDM / TPO), asphalt shingle and metal roofs: installed price and lifespan
MaterialPer sq ft installedTypical lifespan
Flat (EPDM / TPO)$4.00–$13.007–25 years (limited evidence)
Asphalt shingles$4.00–$8.0020–35 years
Metal$5.50–$20.0040–70 years

Flat (EPDM / TPO) lifespan: Limited evidence. It rests on one source so far, and our standard for a lifespan is two, including an industry or government source.

Sources: HomeGuide – Asphalt shingle roof cost; This Old House – New roof cost; HomeGuide – Metal roof cost; Fixr – Flat roof replacement cost; Angi – Flat roofing materials; InterNACHI – Standard Estimated Life Expectancy Chart; HomeAdvisor – Roof inspection cost; Fixr – Asphalt shingles cost (3-tab, architectural, luxury). How we estimate

For cost per year of lifespan, see our metal vs shingles guide.

What changes the price of a flat roof

Roof size

Roofs are priced by the square, 100 sq ft of roof surface. The calculator works out your roof area from your home or takes the area you enter.

EPDM or TPO membrane

Our range of $4.00–$13.00 per sq ft covers EPDM and TPO membranes together; we have no separate sourced figure for either one.

Pitch

A steeper roof has more surface: about 41% more at 12/12 than over a flat footprint. Our estimate also raises the labor and removal part on steep roofs.

Old layers

Removing each old layer costs about $0.50–$3.00 per sq ft of roof in our data. Choose the number of layers under “More options” in the calculator.

Region

We have no regional data for this material, so the estimate is a national average whichever state you choose. Local quotes can land above or below it.

Decking

Damage to the boards under the old roof often shows only once it is off, so quotes usually price replacement sheets separately.

How to read a quote for a flat roof

Get written quotes from more than one licensed, insured roofer and compare them line by line.

  • Membrane: EPDM or TPO, and the number of squares it covers.
  • Labor: installing the membrane, about 60% of the installed price in our estimate.
  • Tear-off and disposal: removing each old layer and hauling it away.
  • Decking repairs: usually a price per sheet, charged only for sheets that need replacing.
  • Price per square: divide the total by the squares on the quote and compare with the table above.

Our figures are estimates; the written quote is what you agree to.

Flat (EPDM / TPO) roof cost questions

How much does flat roof replacement cost?

About $5,000–$52,800 on a 1,000–3,000 sq ft home with one story and no pitch (a flat roof), including removing one old layer. Enter your home in the calculator above for your own range, or see the table by home size.

How much does a flat roof cost per square foot?

About $4.00–$13.00 per square foot of roof installed (materials and labor), or $400–$1,300 per square of 100 sq ft. Our typical figure is $7.50 per sq ft. Evidence for this price: Strong evidence.

How much does a TPO roof cost?

Our flat roof range of $4.00–$13.00 per sq ft installed covers EPDM and TPO membranes together. We have no separate sourced figure for TPO alone, so we don’t show one.

How long does a flat roof last?

Our data gives 7–25 years (limited evidence). That figure rests on one source so far, so we show it with limited evidence until a second source confirms it.

How does the flat roof calculator work?

It works out your roof area from your living area and stories, or takes the roof area you enter, then multiplies by the installed price per square foot and adds tear-off for each old layer. Pitch buttons go from flat to 3/12 for low-slope roofs. See how we estimate.

How we estimate

  • Prices: installed cost per square foot of roof area (US national average), built from named sources, each with the date we checked it, listed on our methodology page.
  • Roof area: living area ÷ stories × 1.10 for overhangs × pitch multiplier, or the roof area you enter.
  • Cost: roof area × installed price per sq ft, split into materials and labor by the labor share (60% for this material); labor and tear-off (per sq ft for each old layer) × the steep-roof factor.
  • Region: none: there is no regional data for this material, so every estimate is national.
  • Price per square: the installed price per sq ft × 100, the new roof only, without tear-off.
  • Rounding: totals to the nearest $100; prices per square to the nearest $5.

An estimate, not a quote. Get written quotes from licensed, insured roofers.