Roof Pitch Calculator

Last updated

This roof pitch calculator turns a rise and run, an angle or a level reading into pitch, degrees, percent slope and the multiplier.

Find your roof pitch

Pick what you know. Results update as you type.

From house plans or a measured triangle: the vertical rise and the horizontal run under it.

Unit
in
in

Roof pitch

6/12

Pitch band: Medium

Angle
26.6°
Percent slope
50%
Multiplier
1.118
12 in6 in26.6°

Formula used

  1. Pitch = rise ÷ run × 12 = 6 ÷ 12 × 12 = 6
  2. Angle = atan(6 ÷ 12) = 26.6°
  3. Percent slope = 6 ÷ 12 × 100 = 50%
  4. Multiplier = √(1 + (6 ÷ 12)²) = 1.118

Roof pitch is the rise in inches for every 12 inches of horizontal run, written as X/12. To calculate it, divide the rise by the run and multiply by 12. A 6/12 pitch rises 6 inches per foot, which is 26.6° or a 50% slope. Enter your rise and run, an angle or a level reading above.

Roof pitch chart: 1/12 to 12/12

Angle, percent slope and multiplier for each common pitch, worked out with the formulas below. Multiply a footprint area by the multiplier to get roof area.

Roof pitch chart
PitchAnglePercent slopeMultiplier
1/124.8°8.3%1.003
2/129.5°16.7%1.014
3/1214.0°25%1.031
4/1218.4°33.3%1.054
5/1222.6°41.7%1.083
6/1226.6°50%1.118
7/1230.3°58.3%1.158
8/1233.7°66.7%1.202
9/1236.9°75%1.250
10/1239.8°83.3%1.302
11/1242.5°91.7%1.357
12/1245.0°100%1.414

How to measure roof pitch

You can find your pitch without going on the roof. Measure from the ground, the attic or your house plans. For anything on the roof itself, hire a licensed, insured roofer.

From the ground

Stand back from a gable end, the triangular wall under the roof’s peak, and take a photo straight on. Open it on your phone and measure the roof edge with a smartphone level or angle app held against the screen. Enter that angle in the Angle tab.

In the attic

Hold a 12-inch level flat against the underside of a rafter, with one end touching it. Measure straight up from the level’s other end to the rafter. That measurement in inches is your rise over 12, so enter it in the Level reading tab.

From house plans

Elevation drawings often mark the pitch with a small triangle labelled 12 and the rise, such as 6 over 12. If they give dimensions instead, enter the rise and the run under it in the Rise and run tab.

Worked example: 1,500 sq ft at 6/12

Here is how pitch turns a footprint into roof area and roofing squares, for a one-story home with a 1,500 sq ft footprint.

  1. Footprint: 1,500 sq ft.
  2. Add 10% for overhangs: 1,500 × 1.10 = 1,650 sq ft.
  3. Multiply by the 6/12 pitch multiplier: 1,650 × 1.118 = 1,845 sq ft of roof.
  4. Divide by 100 for roofing squares: 18.4 squares.

A square is 100 sq ft of roof, the unit roofers price and order materials by.

Roof pitch questions

What is roof pitch?

Roof pitch is how steep a roof is, written as the rise in inches for every 12 inches of horizontal run, such as 6/12. It can also be given as an angle in degrees or a percent slope; the calculator above converts between all three.

How do you calculate roof pitch?

Divide the rise by the run and multiply by 12. A roof that rises 4 ft over an 8 ft run is 4 ÷ 8 × 12 = 6, so it has a 6/12 pitch. Use the same unit for both numbers.

How do you measure roof pitch?

Measure from the ground, the attic or your house plans; the steps above cover all three. For anything on the roof itself, hire a licensed, insured roofer.

How do you convert roof pitch to degrees?

Take the arctangent of the rise divided by 12. For a 6/12 pitch that is atan(0.5) = 26.6°. The roof pitch chart lists the angle for every pitch from 1/12 to 12/12.

What is the roof pitch angle of a 4/12 or 12/12 roof?

A 4/12 roof pitch angle is 18.4°, and a 12/12 roof is 45.0°, because its rise equals its run. To go the other way, enter an angle in the Angle tab of the calculator.

What is the pitch multiplier?

It is how much longer the sloped roof is than the flat distance under it: √(1 + (rise ÷ 12)²). Multiply a footprint area by it to get roof area; at 6/12 the multiplier is 1.118.

How we estimate

  • Pitch = rise ÷ run × 12, or 12 × tan(angle) from an angle.
  • Angle = atan(rise ÷ 12); percent slope = rise ÷ 12 × 100.
  • Multiplier = √(1 + (rise ÷ 12)²): roof area = footprint × 1.10 for overhangs × multiplier.
  • Pitch bands (low, medium, steep, very steep) come from the limits in our cost data and are used to adjust cost estimates for steeper roofs.

An estimate, not a quote. Get written quotes from licensed, insured roofers.